Find in Store

Rockford Fosgate Punch PM400X2

400W Punch Series Class-ab 2-Channel Marine Amplifier

Key Features:
  • Manufacturer: Rockford-Fosgate

$349.99

30 in stock
SKU PM400X2
Add to wishlist Add to compare

Description

Features:

  • 2-Channel Punch Series Class-ab Marine Amplifier
  • RMS Power Rating:
    • 4 ohms: 125 watts x 2 chan.
    • 2 ohms: 200 watts x 2 chan.
    • Bridged, 4 ohms: 400 watts x 1 chan.
  • Dynamic Power:
    (PVC/PowerCube)
    • 4 ohms: 149 watts x 2 chan.
    • 2 ohms: 256 watts x 2 chan.
  • Includes a Rockford Fosgate Performance Verification Certificate
    w/ Inspection Data & Actual Power Rating, (aka “Birth Sheet”)
  • CEA-2006 compliant amplifier
  • CE Compliant
  • LED power (blue) and protect (red) indicators
  • Features C.L.E.A.N. Set-up with 10-step set-up procedure
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • Marine grade two part epoxy coating on circuit boards
  • Marine grade stainless steel hardware
  • Preamp RCA outputs to daisy chain multiple amps
  • Balanced Differential Inputs, to eliminate noise picked up by signal cables
  • Protected against Dust, UV, & Corrosion
  • Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
  • Features MEHSA3 (Maximum Efficiency Heat Sink Application – gen3)
  • Input sensitivity: 150 mV – 12 V
  • Frequency Response: 20 – 20,000 Hz
  • Efficiency (average): 72% @ 4-Ohm
  • Total Harmonic Distortion (THD): <1.0%
  • Punch EQ Bass: 0 – +18dB boost @ 45Hz.
  • 12dB/octave Butterworth crossover (selectable)
  • Variable high-pass filter: 50 – 250 Hz, 12 dB/octave
  • Variable low-pass filter: 50 – 250 Hz, 12 dB/octave
  • Recommended Fuse Rating: 60A x 1 inline (not included)
  • Operating Voltage: 9 – 16 VDC
  • Max Current Draw: 55A
  • Average Current Draw: 28A
  • Power Wire Gauge: 4 AWG – 8 AWG
  • Speaker Wire Gauge: 8 AWG – 18 AWG
  • Dimensions: 7.76″W x 11.03″L x 2.38″H

Specifications:

Power Specifications – Full Range Channels:

  • RMS Power @ 4 ohms: 100 watts x 2 channels
  • RMS Power @ 2 ohms: 200 watts x 2 channels
  • Bridged RMS Power: 400 watts x 1 channels

Amplifier Specifications:

  • Amplifier Class: AB
  • Number of Channels: 2
  • Maximum Input Gauge Size: 4 AWG
  • Minimum Impedance Unbridged: 2 ohms
  • Minimum Impedance Bridged: 4 ohms
  • THD at Rated RMS Power: <1.0%
  • Speaker Level Inputs: Optional (Requires Accessory Adapter)
  • Preamp Outputs: 1 pair
  • Built-in Crossover: Low-Pass (LP), High-Pass (HP), Full (AP)
  • High-Pass Crossover Frequency: 50 – 250 Hz
  • Low-Pass Crossover Frequency: 50 – 250 Hz
  • Bass/Gain Remote: Optional (Accessory required and sold separately)
  • Fuse Rating: 60A X 1 In-Line Fuse Recommended
  • CEA-2006 Compliant: Yes

Specification

Manufacturer

Model

Amplifier Type

Reviews

There are no reviews yet.

Write A Review
Skip to content